Tape Playback; Input Selection; Volume Control - AMC 3100a User Manual

I
(2) TAPE PLAYBACK:
Set the input select switch to the "Tape1" (or
"Tape2") positron and set your recorder into the
playback mode.
INPUT SELECTION
The rotary input selector switch selects which
input signal (CD, Tuner, Video, LD, Tapel or
Tape2) is fed to the power amplifier.
VOLUME CONTROL
The volume control adjusts the overall loudness
level of the sound. lt has no effect on the level of
the signals fed to the TAPE OUT jacks for tape
recording. The Volume control is designed for
accurate tracking of its two channels, so that the
stereo balance will not shift noticeably as the
loudness of the sound is vaned.