Table of Contents
Advertisement
Parameter
DHCP Client Log
3.2.8 Configuration Tools
The Configuration Tools screen allows you to save (Backup) the Access Point's
current configuration setting. Saving the configuration settings provides an added
protection and convenience should problems occur with the Access Point and you
have to reset to factory default. When you save the configuration setting (Backup)
you can re-load the saved configuration into the Access Point through the Restore
selection. If extreme problems occur you can use the Restore to Factory Default
selection, this will set all configurations to its original default settings (e.g. when you
first purchased the Access Point).
Description
This page shows all DHCP clients (LAN PCs) currently connected to your
Number of DHCP Clients
network.
are currently linked to the Access Point's DHCP Server. The DHCP Client
IP Address
Log displays the
Refresh
Use the
button to get the most updated situation.
24
Wireless LAN Access Point Configuration
displays the number of LAN clients that
MAC Address
and the
of each LAN Client.
Advertisement
Table of Contents
