Troubleshooting; Specifications; Legal Notices - Dynex DX-DPF9 User Manual

Troubleshooting

Troubleshooting
Problem
The digital picture frame
won't turn on.
A memory card is inserted in
the digital picture frame but
you cannot view your photos.
The picture displays some
pictures slower and some
pictures faster.

Specifications

Photo format
Memory card formats
Panel size
Power source
Power consumption
Operating temperature 41~90°F (5~35°C)
Weight
Dimensions (W×H×D)

Legal notices

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
FCC warning
Changes or modifications not expressly approved by the party responsible for compliance
with the FCC Rules could void the user' s authority to operate this equipment.
DHHS and FDA safety certification
This product is made and tested to meet safety standards of the FCC, requirements and
compliance with safety performance of the U.S. Department of Health and Human
Services, and also with FDA Radiation Performance Standards 21 CFR Subchapter J.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
RSS 310 statement
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more
than that permitted for successful communication.
Copyright
®
© 2007 Dynex. DYNEX is a registered trademark of Best Buy Enterprise Services, Inc.
Other brands and product names are trademarks or registered trademarks of their
respective holders. Specifications and features are subject to change without notice or
obligation.
For service and support call 1-800-305-2204.
Solution
The adapter is not securely connected
to your picture frame or the power
switch is not on.
• Make sure that the memory card is one of the
supported formats and that the files on the card are
JPEG images files.
• Turn your digital picture frame off and make sure
that the memory card is inserted all the way into the
card slot and is inserted correctly.
• Turn the frame on. After a couple of seconds, you
should see your first photo.
• Note: Some digital cameras save images in formats
other than JPEG. Refer to your camera's manual if
your photos are not JPEG files.
Higher resolution pictures load more
slowly. Try using lower resolution
pictures or down sampling your
images. See your camera's operating
manual for details on down sampling
your photos.
JPEG
Secure Digital™, Multi
Media Card™, Compact
Flash™, xD Memory Stick™,
and USB Flash Drives
9" diagonal
AC to DC adapter (9 V DC )
FCC/PSE (Adapter)
1.36 lb. (.62 kg)
11.4 × 7.3 × 1.2 inches
(280 × 178 × 30 mm)
Image Use Restrictions
Use of the images pre-loaded on your digital picture frame is limited to personal,
non-commercial use. Consumer may not modify, duplicate, distribute, retransmit,
republish, reproduce, or create derivative works from the pre-loaded images.
5