Advertisement
Configuring your digital picture frame
1 Press EXIT. The Main menu opens.
2 Press
or
to highlight the
SETTING icon, then press
MODE/ENTER.
The Setup Menu opens.
3 Press or to highlight an option, then press MODE/ENTER to confirm.
You can select:
• Brightness–Adjust Brightness from -3 to +3.
• Sleep Time–Set your digital picture frame to turn off automatically after a
set period of time.
• Slide Show Time–Adjusts the interval between pictures changing in a
slideshow. Options are 5 Seconds, 10 Seconds, 30 Seconds, 60 Seconds, 60
Minutes, 24 Hours, and Off.
• Transition Effect–Select the transition effect to be used during
slideshows. Choices are Random (all transition effects are used), No Effect,
Cover Up, Cover Down, Cover Left, and Cover Right.
• OSD Language–Select the language to be used for the on-screen display.
You can select English, French, or Spanish. The default language is English.
• Photo Mode–Normal/Full Screen. Normal displays pictures in their native
resolution. This may result in black bars being displayed for pictures that are
4:3 format. Full Screen zooms in and crops pictures to fill the entire screen.
• Default–Resets your frame to factory default settings.
• Exit Setup Menu–Close the on-screen menu.
Using your digital picture frame
Starting a picture slideshow:
1 Press the POWER button to turn on
your frame.
2 If no memory card or USB memory
device has been inserted, a slideshow
of pictures contained in the frame's
internal memory will automatically
begin. If a memory card or USB memory device has been inserted, a
slideshow of pictures contained in the inserted media will automatically
begin.
© 2009 Best Buy Enterprise Services, Inc. All rights reserved. DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other products and brand names are trademarks of their respective owners.
3 Press MODE/ENTER once to enter BROWSE mode and view a single picture.
Press MODE/ENTER again to enter THUMBNAIL mode. Thumbnail-sized
images appear on the screen.
4 Press
,
, , or to highlight a thumbnail.
5 Press MODE/ENTER to display the picture.
NOTE: You can rotate pictures clockwise by pressing ROTATE while the picture is on the screen.
Rotated pictures will be stored in their rotated position.
Copying and deleting photos
To copy pictures to your frame:
1 Insert a memory card or USB device. A slideshow of pictures on the inserted
media automatically begins.
2 In SLIDESHOW or BROWSE mode, locate the picture you want to copy, then
press COPY/ DEL. A message asks you if you want to copy the picture.
3 Press
or
to highlight YES, then press MODE/ENTER to confirm.
To delete pictures from internal memory:
1 Remove any card or USB memory device you have inserted in the frame.
2 In SLIDESHOW or BROWSE mode, locate the picture you want to delete, then
press COPY/ DEL. A message asks you if you want to delete the picture.
3 Press
or
to highlight YES, then press MODE/ENTER to confirm. The
picture will be deleted from the frame's memory.
NOTE: The delete function will only delete pictures saved in the frame's memory,
not from a memory card.
Troubleshooting
The frame won't turn on.
Make sure that the AC adapter is inserted properly into the frame and
plugged into the wall outlet.
A memory card is
• Make sure that the memory card is one of the supported formats
and that the files on the card are JPEG picture files.
inserted in your digital
picture frame but
• Turn your frame off and make sure that the memory card is inserted
all the way into the card slot, then turn the frame on again.
pictures cannot be
viewed.
Note: Some digital cameras save pictures in formats other than JPEG. Refer to
your camera's manual if your pictures are not JPEG files.
The frame displays
Higher resolution pictures load more slowly. Try reducing the size of
your images using photo editing software (not included) or setting
some pictures slower
your camera to take pictures at a lower resolution. See your camera's
and some pictures
operating manual for details on how to reduce the resolution of
faster.
pictures taken.
• Make sure the plastic shipping tab has been removed from the
The remote control does
remote's battery compartment.
not work.
• Make sure you are aiming the remote at the sensor located in the
middle of the frame.
• If you are still having problems, replace the battery in the remote.
The frame turns off by
Adjust or disable the Sleep Time function in Settings.
itself.
Pictures stored in the
Pictures in the frame's internal memory can only be viewed if no
memory card or USB memory device is inserted. Remove inserted
frame' s internal memory
cards or devices to view pictures in the frame's internal memory.
cannot be viewed.
Specifications
Photo format
JPEG
Panel size
7 inch
Memory card formats
SD, SDHC, xD, Memory Stick™, and USB flash drives
Power source
AC adapter (5V DC)
Power consumption
<5 W
Operating temperature
41~95°F (5~35°C)
Weight
1.0 lb. (0.45 kg)
Dimensions (W × H × D)
8.8 × 6.2 × 1.2 inches (224 × 157 × 30 mm)
90-day limited warranty
For complete warranty, visit www.dynexproducts.com.
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this product is subject
to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply within the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC warning
Changes or modifications not expressly approved by the party responsible for
compliance with the FCC Rules could void the user's authority to operate this
equipment.
Notices
Specifications and features are subject to change without notice or obligation.
For service and support call (800) 305-2204.
ENGLISH 09-0443
Advertisement
