Philips LC7.1HE LA Service Manual page 18

EN 18 4. LC7.1HE LA
4.3.13 LCD Panel 42" model
1. Remove the rear cover, as described earlier.
2. Refer to figures "LCD panel (42" model)" below.
3. Unplug the connector from the LED & IR board [a].
4. Unplug the connectors from the SSB [b].
5. Unplug the connectors from the Speakers [c].
6. Do NOT forget to unplug the LVDS connector [d] from the
SSB. Important: Be careful, as this is a very fragile
connector!
Mechanical Instructions
b
1
1
2
c
Figure 4-20 LCD panel (42" model) [1/2]
4
4
Figure 4-21 LCD panel (42" model) [2/2]
7. Remove screws [1] that hold the support bars and remove
those.
8. Remove screws [2] from the speaker frames and remove
those.
9. Remove central sub-frame fixation screws [3].
10. Remove LCD panel fixation screws [4].
11. Lift the complete central sub-frame from the set (incl. the
i-Board and wiring).
12. Lift the LCD panel from the front cabinet.
d
2
3
d
3
1
1
a
c
G_17150_114.eps
140807
4
4
G_17150_119.eps
160807