Chapter 4 Connections - Fujitsu PGA-401P Operation Manual

Chapter 4 Connections

This chapter explains how to connect individual devices before turning their power on.
4.1 Connecting the Adapter Board to the Emulator
4.2 Connecting the Adapter Board with the Header Board
4.3 Installing the Evaluation MCU
4.4 Installing the Memory Board
4.5 Installing a Bypass Capacitor for DVCC
Note : Shut off power to the entire system before starting the operations descried in this chapter. Performing
such operations with the power on may result in electric shock or device faults.
When unplugging any cable, remove it while holding the case connector without pulling the cable itself.
Do not force any cable to bend, or it may break.
All manuals and user guides at all-guides.com
17