Screen Setup Menu - Dual XDVDN9131 Installation & Owner's Manual

XDVDN9131
Screen Setup - Menu

Screen Setup Menu

Settings Default
Brightness 10
(OSD)
Screen Tilt
TS Calibrate
Version List
23
OPERATION
• From the main menu, press
Setup mode.
• Press the
• Select desired parameter you wish to change.
• Page will return back to previous screen after 15 seconds of inactivity or by
pressing the RETURN arrow in the top right corner.
• Press the
SCREEN Setup Menu matrix
Options
0 - 20 Press
(OSD) brightness to the desired setting. Brightness can also be
adjusted by touching the Brightness + and - buttons.
2 1 - 4 Select 1 to 4 to adjust the default tilt angle of the screen
Calibration Touch Calibration to enter the Touch Screen calibration mode
Displays software version of unit (pages 2 and 3)
SCREEN SETUP icon to access the Screen
PAGE DOWN icon to access the Version List (pages 2 and 3).
PAGE UP icon to access Screen Setup page 1.
on the remote, then press OK to adjust the
 or 
Function