Setup Menu - Dual XML8100 Installation & Owner's Manual

XML8100 OPERATION
General Operation
Setup Menu Press and hold AUDIO/MENU for more than 3 seconds to
access the setup menu, then press AUDIO/MENU to cycle
through menu options. When desired option appears in the
display, rotate the volume knob left/right to adjust or activate
the desired function.
Menu Exit
Press BAND to exit any menu or submenu.
Menu Function Options
Auto Station
Auto Store
Store
Frequency US
Tuner Frequency
Spacing
Frequency EU
Auxiliary On
Auxiliary
Input
Auxiliary Off
Rear/Sub Sub
Rear/Sub
RCA output
Rear/Sub Rear
Loud Off
Loudness
Curve
Loud On
Clock Off
Clock
Display
Clock On
Beep Off
Beep Confirmation
Beep On
Programmable
Prog-Vol #
Turn On Volume
Local Off
Local/Distance
Tuning
Local On
Message Off
Power on Message
Message On
Scroll Once
Scrolling
Option Scroll On
Scroll Off
Dimmer High
Illumination
Dimmer Med
Dimmer
Dimmer Low
Demo Off
Demonstration
Mode
Demo On
8
All manuals and user guides at all-guides.com
Action
Press the center SELECT to seek and save 6 strong stations in the cur-
rent band. Note: This option only appears in Tuner mode.
Programs unit to USA tuner spacing.
(200kHz for FM and 10kHz for AM)
Programs unit to European tuner spacing.
(50kHz for FM and 9kHz for AM)
Enables the rear RCA auxiliary input.
Disables the auxiliary input.
Programs the Rear/Sub RCA preamp output to rear.
Programs the Rear/Sub RCA preamp output to subwoofer.
Disables the loudness function.
Enables the loudness function. Activating this feature will enhance the
bass and treble frequencies when listening to music at low volumes.
Programs unit to not display the clock when the power is off.
Programs unit to display the clock when the power is off.
Disables the confirmation beep.
Enables the confirmation beep.
Programs unit to turn on at a specific volume
(default is OFF).
Activates distance tuning.
Activates local tuning for strong station reception only.
Disables power on message.
Enables power on message to be displayed.
Programs unit to scroll once, then show the first 10 characters on the
display.
Programs unit to scroll continuously.
Programs unit to show the first 10 characters on the display.
Programs unit to the brightest illumination level.
Programs unit to the middle illumination level.
Programs unit to the dimmest illumination level.
Disables the demonstration message.
Enables the demonstration message.
Setup Menu