Am/Fm Tuner Operation - Dual XDVDN9131 Installation & Owner's Manual

XDVDN9131

AM/FM Tuner Operation

AM/FM Tuner Mode
Manual Tuning
Seek Tuning
Storing Presets
Auto Store Presets
Preset Scan
29
OPERATION
From the main menu, touch TUNER icon to select AM/FM Tuner mode.
From the remote control or the front panel:
Press MODE until the current station information is displayed on the screen.
Band Touch BAND on the screen repeatedly until the desired band is displayed, FM1,
FM2 or AM.
Press the BAND button on the front panel to switch between bands, FM1, FM2
or AM.
From the remote control:
Press the BAND button.
Touch on the screen to tune to the next higher frequency step.
Touch on the screen to tune to the next lower frequency step.
Touch and hold either
multiple stations.
From the remote control:
Touch or
Touch to tune to the next higher strong station.
Touch to tune to the next lower strong station.
From the remote control:
Press to tune to the next higher strong station.
Press to tune to the next lower strong station.
There are 24 FM and 12 AM presets available in 3 bands.
After finding the desired frequency to store in memory, touch and hold the
screen on any of the frequencies or preset numbers in the preset station list
until it turns yellow. The new station will replace the previous selection.
Press and hold AS/PS on the front panel or touch and hold AS/PS to
automatically program the 12 strongest stations available into the presets in the
current band.
Press AS/PS on the front panel or touch AS/PS to scan through all tunable
presets in the current band and play them for 10 seconds each.
or on the screen to continue tuning across
to perform manual tuning.