XDVD8182
SCREEN Setup - Menu
Screen Setup Menu
Settings
Default
Brightness
Screen Tilt
Screen Saver
TS Calibrate
Version
System Standby
5
OPERATION
•
Press the SCREEN button to access the SCREEN setup mode
•
Select desired parameter you wish to change
•
Page will return back to previous screen after 10 seconds of inactivity or by
pressing the RETURN button
SCREEN Setup Menu matrix
Options
Press the
10
0 - 0
rotary once and rotate clockwise/counter-clockwise to adjust
the BRIGHTNESS to the desired setting
4
1 - 6
Select 1 to 6 to adjust the default tilt angle of the screen
On
Off
Select On to activate the screen saver, Off to deactivate
On
No
No
Touch Yes to enter the Touch Screen calibration mode
Yes
Software version of unit
To conserve the LCD backlight lifespan or to eliminate glare while night driving,
press STANDBY. The TFT screen will black out, however all other operations
continue to operate. Press any button except VOLUME or touch the screen again
to return to normal viewing.
Function
buttons on the remote or press the right
or