Siemens SITRANS FCT030 Quick Start Manual page 8

5
4
Active current output
Active current output
6. Tighten cable gland.
Note
Active or passive current output is preselected at ordering.
Note
Load
Current output (channel 1): < 500 Ω (HART ≥ 230 Ω)
Inputs and outputs (channels 2 to 4)
1. Remove cap and ferrule from cable gland and slide onto cable.
2. Push cable through open gland and cable path.
3. Restore ferrule and tighten cap to lightly hold cable in place.
4. Signal cable screen is folded back over outer sheath and grounded beneath cable clamp.
5. Connect wires to terminals using wiring tool.
8
⑤ C
④
Ca+
Cp-
C
U
0
Ca+
- +
6
5
Passive current output
Passive current output
⑥ Cp-
⑤
C
Cp-
C
+
-
Ca+
SITRANS FCT030 transmitter
A5E03922778-01, 03/2012