Siemens SITRANS FCT030 Quick Start Manual page 13

①
Measurement view
②
Acccess level view
③
Measurement view
④
Measurement view
⑤
Alarm view - level 1
⑥
Alarm view - level 2
⑦
Alarm view - level 3
Navigating the navigation view
Browse the navigation view and menu items using the control buttons as follows:
Table 5-5 Navigation view
Key Function
Enter the next higher level of the navigation view (for example from level 2 to level 1).
If located on level 1 in the navigation view then enter the operation view
Select the item above in the list; keep pressing the key to accelerate scrolling up the selection list. If the
key is pressed when the top item is selected, the bottom item will be highlighted
Select the item below in the list; keep pressing the key to accelerate scrolling down the selection list. If the
key is pressed when the bottom item is selected, the top item will be highlighted
Enter the next lower level of the navigation view (for example from level 1 to level 2).
If a parameter is selected in the navigation view then enter the parameter view
Editing the parameters
When this symbol is shown in the graphics, the four buttons on the LUI are used for changing the parameters as
described below.
SITRANS FCT030 transmitter
A5E03922778-01, 03/2012
13