Siemens SITRANS FCT030 Quick Start Manual page 4

Hide thumbs Also See for SITRANS FCT030:

Vertical rotation

1. Loosen locking cap at end of mounting bracket by three turns.

2. Carefully loosen and rotate transmitter into desired position (15° steps).

3. Firmly tighten locking cap (torque: 25 Nm).

Connecting

WARNING

As long as the device is energized, the lid of the housing on the sensor connection area may only be opened by qualified

personnel.

Before removing the terminal cover, the auxiliary power must be switched off from all poles.

Following installation, the terminal cover must be screwed back on again.

1. Remove blind plugs where required and mount cable glands.

①

Input/output connection (channels 2 to 4)

②

Power supply connection

③

Current output/HART connection (channel 1)

2. Remove lid lock screw for terminal connections lid.

3. Remove lid for terminal connections.

SITRANS FCT030 transmitter

A5E03922778-01, 03/2012