Siemens SITRANS FCT030 Quick Start Manual page 7

Hide thumbs Also See for SITRANS FCT030:

①

L/+

②

N/-

③

AC connection

Power: 100 to 240 V AC +10/-15%, 47 to 63 Hz

6. Anchor cable with clamp bar.

7. Close and latch power supply terminal protection cover.

8. Tighten cable gland.

Current output/HART (channel 1)

1. Remove cap and ferrule from cable gland and slide onto cable.

2. Push cable through open gland and cable path.

3. Restore ferrule and tighten cap to lightly hold cable in place.

4. Signal cable screen is folded back over outer sheath and grounded beneath cable clamp.

5. Connect wires to terminals using wiring tool.

SITRANS FCT030 transmitter

A5E03922778-01, 03/2012

DC connection

Power: 24 to 90 V DC +20/-20%