Siemens SITRANS FCT030 Quick Start Manual page 6

Hide thumbs Also See for SITRANS FCT030:

Wiring tool

Use the wiring tool for connecting the cables.

The wiring tool is located in the application terminal space.

Wiring tool location

1. Insert wiring tool hook into receptor slot.

2. Press wiring tool wedge into top slot to spread clamp plates.

3. Insert wire.

4. Release wiring tool.

Power supply

1. Flip open power supply terminal protection cover.

2. Remove cap and ferrule from cable gland and slide onto cable.

3. Push cable through open gland and cable path.

4. Restore ferrule and tighten cap to lightly hold cable in place.

5. Connect ground to terminal

and power to terminals L/+ and N/- using wiring tool in the manner shown below at right.

SITRANS FCT030 transmitter

A5E03922778-01, 03/2012