Siemens RUGGEDCOM RX1501 Installation Manual page 53

Modules
4.4 Installing/Removing Power Modules
4. Insert the module into the empty slot.
Figure 4.6
5. Hand-tighten the screws to secure the power module to the chassis.
6. Turn on power to the device and confirm the module is receiving and supplying
power. This is indicated by the LEDs on the module.
44
All manuals and user guides at all-guides.com
1
2
3
Chassis
1
Power Module
2
Screws
3
Installing a Power Module
LED State
O Green
I Green
Description
The module is supplying power
The module is receiving power
Installation Manual, 05/2020, C79000-G8976-1054-17
RUGGEDCOM RX1501