Crestron UC-2-Z Quick Start

UC-2-Z(-I)
Crestron Flex Tabletop Conference Device for Zoom Rooms™ Systems
The Crestron® UC-2-Z(-I) is a tabletop conference device included in
select Crestron Flex conference systems.
For instructions on system connection and configuration, refer to the
system's Quick Start Guide listed below:
UC-MM30-Z(-I) and UC-MM30-Z-L(-I)
l
UC-MMX30-Z(-I) and UC-MMX30-Z-L(-I)
l

In the Box

1 UC-2-Z(-I), Crestron Flex Tabletop Conference Device for
Zoom Rooms™ Systems

Additional Items

1 PoE+ Injector (2055605)
2 Cable, CAT5e, RJ-45 - RJ-45, 11.8 ft (3.6 m) (2056204)
1 Cable, USB 2.0, A - Micro B, 5.8 ft (1.8 m) (2055579)

Buttons and Indicators

Tap one of the four mute buttons located at each corner of the device to
mute or unmute the integrated microphone.
A light bar is located above the screen. LEDs are located behind the
mute buttons and light bar and will respond to muting or unmuting the
microphone.
The four mute buttons and the light bar will display red or green to
indicate the following states:
Lighted green: The microphone is unmuted.
l
Lighted red: The microphone is muted.
l
Flashing green: The device is powering on.
l
Quick Start
1