Directed Electronics 951 Owner's Manual page 28

Directed electronics remote start keyless entry owner's guide

Hide thumbs Also See for 951:

Table of Contents

Details

Smart start uses temperature and voltage settings to determine when the

vehicle should start and run. If any changes to temperature or voltage are made

using the Bitwriter programming tool Smart start activation is affected.

The Smart Start function works similar to the Timer mode. The system must be

in the locked mode. Using the system default settings, it has a maximum of 6

starting cycles, and checks the voltage/cabin temperature every 3 hours to see

if the thresholds have been met.

If thresholds have been met then the remote start will start the vehicle and run for

the pre programmed time. It counts the first start as one successful start, leaving

5 start cycles.

If the threshold has not been met then the system will not start the vehicle, and 6

start cycles are left. The unit continues to check threshold levels every 3 hours.

Table of Contents