Denso 400BW-CE User Manual page 136

• Security and Setting Method
The security level can be changed based on combinations of the encryption and authentication. The
setting parameters for each security level are shown in the table below.
Setting
parameter
Encryption Disabled
Authentication
Network key
Key index
The key is
provided
automatically
Enable 802.1X
authentication
EAP type
(Note)
– : No entry possible
√ : Select
* : No entry or no selection
xxxxxx : Enter the network key.
This key is provided automatically:
Select this check box to automatically obtain the network key.
Enable 802.1X authentication:
Select this check box to enable 802.1X authentication.
EAP type:
Select the "Enable 802.1X authentication" checkbox to enable
selection.
Refer to "Settings when PEAP, TLS Selected for EAP Type" on
the following page for further details.
None
(802.1x)
WEP
– Open
– xxxxxx
– 1 to 4
– *
– *
– –
Security
PEAP EAP-TLS
(802.1x)
WEP WEP
Open Open
– –
– –
√ √
√ √
PEAP TLS
116
PEAP EAP-TLS
(WPA) (WPA)
TKIP TKIP
WPA WPA
– –
– –
– –
– –
PEAP TLS
PSK
(WPA)
TKIP
WPA-PSK
xxxxxx
–
–
–
Ignored