Denso 400BW-CE User Manual page 135

Wireless Information
Wireless Properties
Tapping the Wireless Information tab on the WZC Menu displays
the screen shown at left.
The SSID list for which a search was performed automatically by the
BHT displays.
If automatic recognition is not made, double-tap Add New... and
manually input the SSID.
Tap the SSID for which a connection is to be made from the SSID list,
and then tap the Connect button to begin connecting to the wireless
network.
When there is no settings for connection to the selected wireless
network, the settings screen described in the following section
displays.
Double-tap an SSID from the SSID list in the Wireless Information
tab to display the screen on the left.
Perform settings to connect to the wireless network.
You can set the following:
Network name (SSID):
Input the SSID. Manually input the SSID if it is not automatically
recognized.
This is an ad hoc network:
Do not check this check box because ad hoc mode is not
supported.
Encryption:
Select the encryption method.
Authentication:
Select the authentication method when the encryption method is
selected.
Network key:
Enter the WEP Key when the encryption method is WEP.
Enter the Pre Shared Key when the authentication method is
WPA-PSK.
Key index:
Enter the network key index (1 to 4).
115
Chapter 2 Getting Started the BHT and System Menu