Track Search; By Using The Search Mode Button; By Using The Skip Buttons H G; Time Search - Denon DVD DVD-1930 Operating Instructions Manual

DISC PLAYBACK

Track Search

Super
DVD-A VCD
Audio CD
There are two ways to begin playback a disc at a specific
track.

By using the SEARCH MODE button

1
Press the SEARCH MODE but-
ton.
• The track search display
appears.
2
Within 30 seconds, select a desired track number using
the Numeric buttons.
• For the disc with less than 10 tracks, press the track
number directly.
• For discs with 10 or more but less than 100 tracks, to
play back a single-digit track, press 0 first, then the
track number (e.g. for track 3, press 0, 3). To play back
a double-digit track, press the track number.
• For discs with 100 or more tracks, to play back a sin-
gle- or a double-digit track, press 0 first, then the track
number (e.g. for track 3, press 0, 0, 3, and for track 26,
press 0, 2, 6). To play back a triple-digit track, press the
track number.
• Press the CLEAR button to erase the incorrect input.
NOTE:
• The +10 button can also bring up the track search dis-
play except for the disc with less than 10 tracks. For
such a disc, track search can be done by just pressing
the track number.
By using the SKIP buttons H
During playback, press the SKIP G
next track. Press it repeatedly to skip to subsequent tracks.
Press the SKIP H H button to go back to the beginning of the
current track. Press it repeatedly to go to the previous tracks.
• Track number will appear briefly on the front panel display.
• If the SKIP H or G button is pressed while the playback
is paused, the playback will be paused again after skipping
to the next track.
NOTE:
• The SKIP H and G buttons are not available when
playback is stopped.

Time Search

DVD-V DVD-A VCD
1 Press the
SEARCH MODE
button until the time search
screen appears on the TV
screen.
2 Within 30 seconds, enter a desired time point on
the disc with the Numeric buttons.
• Playback will start at the specified time.
• For Time Search, "0" appears automatically when there
is no need to enter a number. For example,
"0:0_:_ _" appears on the time search screen if the total
time of the title or track is less than 10 minutes.
3 Press the CLEAR button to erase an incorrect
input.
NOTE:
• For some DivX ® files, Time Search may not function.
CD MP3 JPEG
WMA DivX ®
__/ 15
H G G
G button to move to the
Super
CD DivX
®
Audio CD
- : -- : -- 1:23:45
– 21 –

Marker Setup Screen

DVD-V DVD-A
You can use markers to memorise your favourite places on
a disc.
1 Press the SEARCH MODE
button repeatedly until the
display screen and Markers
appear during playback.
2 Press the Cursor buttons
number of the marker (1-10) and ensure that
"_ _ _ _ : _ _ : _ _" appears on the display.
3 When the disc reaches the point where you want
to remember, press the ENTER button.
• The title or track and elapsed playback time will
appear on the TV screen.
4 To return to the Marker later, press the SEARCH
MODE button repeatedly during playback and the
Cursor buttons s or B) to choose a desired
(
marker, then press the ENTER button.
5
Press the SEARCH MODE or RETURN button to
exit.
NOTES:
• Opening the disc tray, turning off the power, or select-
2
ing AC at step and pressing the ENTER button will
erase all Markers.
• To clear a marker, using the Cursor buttons (s or B)
button, select the marker number to be cleared and
press the CLEAR button.
• You can mark up to 10 points.

Repeat

• The REPEAT button is available only during playback.

REPEAT TITLE / CHAPTER

To activate Repeat function, press the REPEAT button during
playback.
• The repeat mode changes as described below every time
you press the button.
OFF CHAPTER
(repeat off)
(current chapter repeat) (current title repeat)
NOTES:
• The Repeat Title/Chapter setting will be cleared when
moving to other title or chapter.
• Repeat playback does not function during A-B repeat
playback.
• Repeat Title/Chapter is not available with some scenes.
Super
VCD CD
Audio CD
1 2 3 4 5 6 7 8 9 10 AC
-- -- : -- : --
s or B) to select the
(
DVD-V
TITLE
EN