Functional Overview; Front Panel; Remote Control; Loading The Batteries - Denon DVD DVD-1930 Operating Instructions Manual

FUNCTIONAL OVERVIEW

FRONT PANEL

1 2
ON / STANDBY ON / STANDBY
13

REMOTE CONTROL

1
14
15
16
17
18
19
20
21
22
23
6
24
5
25
26
27
The buttons with circled numbers can only be operated with
the remote control.

Loading the Batteries

1. Open the battery compartment cover.
2. Insert two "R6P" (AA) batteries, with
each one oriented correctly.
3. Close the cover.
1. ON/STANDBY (POWER ON/OFF) Buttons [page 17]
6/25
2. Disc loading tray
3 4 5 7/29
3. OPEN/CLOSE Button [page 17]
4. PLAY Button [page 17]
5. STOP Button [page 17]
6. H (SKIP DOWN) Button [page 20]
7. G (SKIP UP) Button [page 20]
8. DIMMER Button [page 17]
10 8
9. PURE DIRECT Button [page 17]
12 11 9
10. HDMI Button [page 17]
36
3
11. STILL/PAUSE Button [page 18]
12. Display, Remote Sensor Window
35
13. HDMI indicator [page 17]
34
14. A-B REPEAT Button [page 22]
15. REPEAT Button [page 21]
33
16. RANDOM Button [page 23]
32
17. ZOOM Button [page 20]
31
18. CLEAR Button [page 21]
19. ANGLE Button [page 28]
20. MENU Button [page 18]
21. ENTER Button [page 18]
22. Cursor Buttons [page 18]
30
23. RETURN Button [page 18]
24. SEARCH MODE Button [page 20]
25. h (Fast Reverse SEARCH) Button [page 19]
7
4
26. GROUP Button [page 18]
29 27. SUPER AUDIO CD SET UP Button [page 28]
11
28. PAGE Buttons [page 18]
29. g (Fast Forward SEARCH) Button [page 19]
28
30. SETUP Button [page 29]
31. SUBTITLE Button [page 27]
32. TOP MENU Button [page 18]
33. DISPLAY Button [page 26]
34. AUDIO Button [page 27]
35. Numeric Buttons [page 17]
36. MODE Button [page 18]
Cautions On Batteries
• Use "R6P" (AA) batteries in this remote control unit.
• Replace the batteries with new ones approximately once a year, though
this depends on the frequency with which the remote control unit is used.
• If the remote control unit does not function within a close proximity of the main
unit, replace the batteries with new ones, even if less than a year has passed.
• The included batteries are only for verification purpose. Replace them
with new batteries as soon as possible.
• When inserting the batteries, be careful to do so in the proper direction, fol-
lowing the and
• To prevent damage or battery fluid leakage:
• Do not mix a new battery with an old one.
• Do not mix two different types of batteries such as alkaline and manganese.
• Do not short-circuit, disassemble, heat or dispose of batteries in flames.
• Remove the batteries when not planning to use the remote control
unit for a long period of time.
• If the batteries should leak, carefully wipe off the fluid from the inside
of the battery compartment, then insert new batteries.
– 8 –
Press to activate Pure Direct function to reduce noise
level.
Press to set the HDMI connector's video signal output
mode.
Lights up when there is video signal output from the
HDMI OUT jack.
Press more than 2 seconds when you use the front
panel button for this function.
Press more than 2 seconds when you use the front
panel button for this function.
marks in the remote control unit's battery compartment.
EN