Divx Subtitle; Changing The On-Screen Display - Denon DVD DVD-1930 Operating Instructions Manual

DISC PLAYBACK
DivX ® Subtitle
The subtitle created by the user can be displayed during
DivX ® playback.
1 After select the DivX
appear except when the "DivX SUBTITLE" setting
is "OFF". Refer to "Language Setting" on page 29.
FILE :
file name1
2
Press the Cursor buttons (K or L) to select the
desired extension you want to display, then press
the ENTER button. DivX
playback. The subtitle cannot be displayed when
the setting is "OFF".
• If there is more than one extension, the extension
selection appears in the SUBTITLE LIST.
NOTES:
• DivX ® subtitle can only be displayed according to the
same name with an extension of the DivX
• Files whose extension is other than ".SMI", ".smi",
".SRT", ".srt", ".SUB" and ".sub" will not be listed in the
SUBTITLE LIST.
• This unit cannot be recognised if the DivX
subtitle file are not in the one folder.
• The subtitle may not be displayed if the file size is too
large.
• To change the subtitle, refer to "Subtitle Language" on
page 27 if multiple subtitles are available.
• The subtitle cannot display if the on-screen information
is displayed.
• If "DivX SUBTITLE" is set to "OFF" in LANGUAGE
menu, the SUBTITLE LIST will not be displayed even if
you select a DivX ® file with created subtitle.
• Unrecognisable characters will be replaced with asterisks.

Changing the On-Screen Display

You can check information about the current disc by pressing
the DISPLAY button.
1
Press the DISPLAY button during playback.
• Current chapter number/total
chapters, elapsed time and
remaining time of the current
chapter, and current playback
status will be displayed.
2 Press the DISPLAY button again.
• Current title number/total titles, elapsed time and
remaining time of the current title, and current playback
status will be displayed.
3 Press the DISPLAY button for the third time.
• The bit rate (the amount of
video data currently being
read) and current playback
status will be displayed.
• Current repeat setting appears on the display bar only
when the repeat setting is active.
( C: Chapter repeat/
A B: A-B repeat)
• If you are playing back a two-layered disc, the layer
number will also be displayed.
(L0: Layer 0 is being played back. L1: Layer 1 is being
played back.)
® file, the SUBTITLE LIST will
SUBTITLE LIST
[OFF]
[SMI]
[SRT]
[SUB]
FILE LIST : MENU
® with the subtitle starts
® file name.
® file and its
DVD-V
9/49 0:00:00 -0:03:30
IIIIIII
T L1
T: Title repeat/
4
Press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
DivX ®
page 27.)
5 Press the DISPLAY button again to exit.
1 Press the DISPLAY button during playback.
• Current track number/total tracks, elapsed time and
remaining time of the current track, and current play-
back status will be displayed.
2 Press the DISPLAY button again.
• Current group number/total groups, elapsed time and
remaining time of the current group, and current play-
back status will be displayed.
3 Press the DISPLAY button
again.
• The bit rate and current play-
back status will be displayed.
• Current repeat setting appears on the display bar only
when the repeat setting is active.
( T: Track repeat/
A B: A-B repeat)
• If you are playing back a two-layered disc, the layer
number will also be displayed.
(L0: Layer 0 is being played back. L1: Layer 1 is being
played back.)
4 Press the DISPLAY button again.
• During all group, programme or random playback, each
playback status will be displayed when you press the
DISPLAY button. Then press the DISPLAY button
again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
page 27.)
5 Press the DISPLAY button again to exit.
1
Press the DISPLAY button during playback.
• Current track number/total tracks, elapsed time and
remaining time of the current track, and current play-
back status will be displayed.
• Current repeat setting appears on the display bar only
when the Repeat setting is active.
( T: Track repeat/
A B: A-B repeat)
Press the DISPLAY button again.
2
• Current track number/total tracks, elapsed time and
remaining time of the entire disc, and current playback
status will be displayed.
• Current repeat setting appears on the display bar only
when the Repeat setting is active.
( T: Track repeat/
A B: A-B repeat)
• On Audio CDs, when you are playing back a disc in
programme or random mode,
RANDOM) will be displayed.
Press the DISPLAY button again.
3
• During programme or random playback, each playback
status will be displayed when you press the DISPLAY
button. Then press the DISPLAY button again.
• Current HDMI status will be displayed during the HDMI
output mode. (Refer to NOTE FOR HDMI DISPLAY on
page 27.)
4
Press the DISPLAY button again to exit.
– 26 –
DVD-A
IIIIIII T L1
G: Group repeat/
Super
VCD
Audio CD
A: All tracks repeat/
A: All tracks repeat/
PROGRAM (or
CD
EN