Denon ADV-1000 Operating Instructions Manual page 29

POWER
(3) Presetting FM and AM stations
VCR POWER
TV POWER
Example: Presetting FM station (currently tuned in) at preset number P03
MENU FUNCTION
ENTER
MODE
VOLUME
BAND
2
2
MUTE
CH SHIFT
NTSC/PAL
STATUS
1,3
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
RDS PTY CT RT
PROG/DIRECT REPEAT A-B REPEAT RANDOM
CH.SELECT T.TONE SDB/TONE SURR.PARA
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
REMOCON MODE
Before operating the remote control unit!
TUNER/TV/VCR
Be sure to press the proper remote control
mode selector button to set the remote control
unit to the AV mode.
1 Tune in the broadcast station that is to be preset and
press the Memory button.
• A "P0–" ("P1–", "P2–" or "P3–") indication flashes
for 10 seconds.
NTSC/PAL
MEMO
Remote control unit
Presetting
• Up to 40 AM or FM stations can be preset using this procedure.
• In addition to the reception frequency, the reception mode (monaural or auto) is also preset, so check the display when
presetting stations.
• If a station is preset at a number where a station is already preset, the previous station is replaced with the new station.
• The preset memory is not cleared when the power cord is unplugged.
(4) Listening to preset stations
POWER
VCR POWER
Example: Listening to the station preset at number P03 (This operation is only possible from the remote control unit.)
TV POWER
MENU FUNCTION
ENTER
MODE
VOLUME
BAND
1
1
MUTE
CH SHIFT
NTSC/PAL STATUS
TU MEMO
SUB TITLE AUDIO ANGLE TOP MENU
RDS PTY CT RT
PROG/DIRECT REPEAT A-B REPEAT RANDOM
T.TONE SDB/TONE SURR.PARA
CH.SELECT
SETUP CDR/MD/TAPE TUNER/TV/VCR DVD
2 While the "P0–" ("P1–", "P2–" or "P3–") indication is
flashing, use the shift button and the channel (CH)
buttons (–, +) to display the preset number "P03".
Each press of the shift button adds 10 to the current preset
number in the range of P01 to P40.
Example:
Starting with a P13
setting, each press of
CH SHIFT
the shift button results
in the changes P13 /
P23 / P33 / P03 /
P13 /... Remote control unit
Example:
Starting with a P0– setting, each press of the shift button
results in the changes P0– / P10 / P20 / P30 / P40 /
P10 /...
3 Press the MEMORY button while the "P03" display is
flashing.
• The "P03" display will light and presetting will be
completed.
NTSC/PAL
MEMO
Remote control unit
Before operating the remote control unit!
TUNER/TV/VCR
Be sure to press the proper remote control
mode selector button to set the remote control
unit to the AV mode.
1 Press the remote control shift button and the channel
(CH) button (–, +) and select preset number "P03".
CH SHIFT
Remote control unit
(5) RDS (Radio Data System)
RDS (works only on the FM band) is a broadcasting service which allows station to send additional information along with the regular
radio program signal.
The following three types of RDS information can be received on this unit:
2 Program Type (PTY)
PTY identifies the type of RDS program.
The program types and their displays are as follows:
News
Affairs
Information
Sports
Education
Drama
Culture
Science
Varied
Pop Music
2 Traffic Program (TP)
TP identifies programs that carry traffic announcements.
This allows you to easily find out the latest traffic conditions in your area before you leaving home.
2 Radio Text (RT)
RT allows the RDS station to send text messages that appear on the display.
NOTE: The operations described below using the RDS, PTY and RT buttons will not function in areas in which there are no RDS
broadcasts.
ENGLISH
Rock Music Phone In
Travel &
Easy Listening
Touring
Light Classical Leisure &
Hobby
Serious
Jazz Music
Classical
Other Music Country Music
Weather &
National Music
Meteorological
Finance Oldies Music
Children's
Folk Music
Progs
Social Affairs Documentary
Religion
29