Philips LC4.2HE Service Manual page 61

8.3.5 Sound
No adjustments needed for sound.
The default values for the audio alignments are:
• QSS: On
• FMI: Off
• NICAM Alignment: 63
• Lip Sync: Off
• DBE: Off
8.3.6 Options
Options are used to control the presence/absence of certain
features and hardware.
Table 8-2 Option values per model
Option
Byte Total Dec Values Total Hex Values Total Dec Values Total Hex Values
OP1 154
OP2 21
OP3 14
OP4 17
OP5 252
OP6 27
OP7 3
9A 154
15 21
0E 14
11 17
FC 252
1B 27
03 3
Alignments
LC4.2HE AA
How to change an Option Byte
An Option Byte represents a number of different options.
Changing these bytes directly makes it possible to set all
options very fast. All options are controlled via seven option
bytes. Select the option byte (OP1.. OP7) with the Menu Up/
Down keys, and enter the new value.
Leaving the OPTION submenu saves the changes in the
Option Byte settings. Some changes will only take effect after
the set has been switched "off" and "on" with the AC power
switch (cold start).
Note: The option values mentioned in the table below are
subject to change.
9A
15
0E
11
FC
1B
03
8. EN 61