DSC Power832 PC5010 Program Update Procedure page 4

[380] First Communicator Option Code:
See Installation Manual section 5.7.11 "Activity Delinquency"
Option [8] ON Delinquency Follows Zone Activity
If ON, the delinquency feature will be used to monitor zone activity. If OFF, the delinquency
feature will be used to monitor arming activity.
Section [381] - Second Communicator Option Code:
See Installation Manual section 5.30 "Audio Interface Module"
Option [5] ON Phone 1 & 3 Listen-In enabled
Option [6] ON Phone 2 Listen-In enabled
Section [393] - LINKS Special Function Preamble:
See Installation Manual section 5.26.4 "LINKS Preamble"
In certain areas, dialing [#] or [ ] reduces the cellular billing increment. This section allows the
use of the [ ] and [#] digits if necessary. The LINKS Special Function Preamble will be sent
before the preamble in sections [390] to [392].
Section [401] - First Downloading Option Code:
See Installation Manual section 5.8 "Downloading"
Option [4] ON User Initiated Call-up enabled
Section [406] - Number of Rings to Answer On:
See Installation Manual section 5.8 "Downloading"
If downloading is enabled, answering machine override is enabled. The panel will also answer
after the number of rings programmed in this section.
Section [499][Installer's Code][499] - Initiate PC-LINK (Local Download):
See Installation Manual section 5.8 "Downloading"
Direct connect downloading (called PC-LINK) is supported. Connect one end of the PC-LINK
cable to the panel and the other directly into the COM port of your computer. After activating
the download via the computer, enter [ ][8][Installer Code][499][Installer Code][499] to begin
the PC-LINK download.
Section [805] - AML Support Programming
At this time AML (Addressable Multiplex Loop) detectors are not available. More information
regarding these detectors will be available when the devices are released.
Additional New Features Supported in the PC5010 V2.0
1. Rotating Keypress Buffer
The panel has a rotating keypress buffer. When disarming, the panel will examine and accept
any four consecutive digits which match a valid user code. Keypad lockout can still be used.
Every fourth key press where a match is not detected will be counted as an invalid code entry.
2. Contact ID
All reporting codes are now supported with the Contact ID format.
3. PGM Output Option [02] - Utility Output
The Utility Output option has been replaced with Command Output #1.
Features Removed from PC5010 V1.0:
• Zone Doubler
• No-Activity Arming
© 1998 Digital Security Controls Ltd.
1645 Flint Road, Downsview, Ontario, Canada M3J 2J6
Tel. (416) 665-8460 • Fax (416) 665-7498 • Tech. Line 1-800-387-3630
Printed in Canada 29002981 R0
OFF Delinquency Follows Arming
OFF Phone 1 & 3 Listen-In disabled
OFF Phone 2 Listen-In disabled
OFF User Initiated Call-up disabled