Care And Maintenance - Black & Decker Press&Steam HGS500 Use And Care Manual

CARE AND MAINTENANCE

This product contains no user serviceable parts. Refer to
service qualified service personnel.
1. Make sure iron/steamer is off, unplugged and
completely cool.
2. Wipe all surfaces with a clean damp cloth.
3. After the iron/steamer has been thoroughly dried,
turn it back on and lightly steam over an old cloth.
This will help remove any residue left in the steam
holes.
4. To avoid mineral buildup, empty the tank after each
use.
CLEANING ATTACHMENTS
• Delicate fabric attachment: Wash with cold water and
small amounts of a gentle cleanser if needed. The
fabric cannot be removed.
• Upholstery attachment: The fabric can be removed
and hand washed with cold water and a gentle
cleanser.
STORAGE
Unplug the iron/steamer whenever it is not in use. Allow
it to cool, then store it out of reach of children in a safe,
dry location. Never wrap the cord around the appliance.
This will cause the cord to wear prematurely and break,
thus voiding the warranty. Handle the cord carefully and
avoid jerking, twisting, or straining it, especially at plug
connections.
9