Setting Temperature Control - ComfortZone RX35 User And Installation Manual

ComfortZone RX35/RX50/RX65
2.3.1 Indoor temperature
Note: The adjustment of the heat control must always be carried out by
the responsible and authorized installer.
This means that all of the housing surfaces and floors must have an indoor
temperature corresponding to about 21° C when the heat pump is operating without
regulation with the house's own thermostats.
If the residents want a higher or lower temperature, it is possible to adjust this
according to their own wishes, see the next paragraph.
2.3.2 Uneven heat in the rooms
If uneven heat between floors, alternatively between different rooms occurs even
though thermostats are fully open everywhere.
Uneven heat is due to the fact that the water flow in the heating system is not
balanced, or that air is present in the system.
The problem is installation-technical.
Contact your installer.

2.4 Setting temperature control.

The ComfortZone RX35-50-65 can regulate the indoor temperature with
various control methods, OUT & IN, OUT or IN.
Factory setting is OUT & IN.
Go to "Advanced settings" / Heating settings "and read which control method
you are operating:
6
Operating instructions