NOTE 12: Replace after 3000 hours. Use hour interval only.
NOTE 13: Do not open the air filter canister except to change the air filter element. See the Periodic Maintenance Manual for your lift truck for the correct
procedure to change air filter element.
NOTE 14: Use Ethylene Glycol Boron-free Antifreeze. Purchase a pre-diluted 50/50 solution; or mix 50% concentrate with 50% distilled or deionized water.
NOTE 15: Hydraulic oil sampling and analysis is a recommended practice. See Hydraulic Cleanliness Procedures 1900 YRM 1620 for oil cleanliness and
water content guidelines. For lift trucks operating in heavy duty applications or highly contaminated environments, take oil samples every 500 hours. Normal
operating conditions may allow for less frequent oil sampling. Oil sampling should be done just prior to all oil and filter changes.
X = Check C = Change L = Lubricate CIL = Check indicator light during operation
134
Table 6. (See Figure 17 Through Figure 20) (Continued)