CHAINTECH 9EJS1 User Manual page 33

4. Mixer Advance Setting:
a) SPDIF:
i) Output:
S/PDIF Playback:
To activate SPDIF OUT. (S/PDIF Out only on earphone and 2 speakers.
Sampling Rate:
Transfer the Wave file from the computer through optical fiber out to any
digital media devices, ex. MD or DAT Advanced media devices. (SPDIF-out
only supports 44.1KHz and 48KHz High frequency rates.)
ii) Input:
Loop back (to digital out):
Transfer the Wave file from the computer through optical fiber out to any
digital media devices, ex. MD or DAT Advanced media devices. (SPDIF-out
only supports 44.1KHz and 48KHz High frequency rates.)
Monitoring (to analog out):
Monitors the SPDIF IN signal (Digital SPDIF signals use the analog output
through LINE OUT to make sound.)
Validity Detection:
Select this option to detect and check the validity of the fiber signal.
Format:
Select between Normal and Reverse.
Device:
For device feature select between S/PDIF #1 and S/PDIF #2.
iii) Copyright Protection:
Audio files have copyrights. Please select this option to prevent
Chapter 5
59
Chapter 4
b) Speakers:
i) Headset & 2 channel speaker setup
ii) 4 channel speaker setup
iii) 6 channel speaker setup
60