Table of Contents
Advertisement
CN24 (CBOX™ 2 Front Audio Connector):
This connector give you the option of a front panel audio jack cable ext. to be plug
into a special custom designed system case.
Simply remove the two jumper caps at pin [5-6] and [9-10] then plug it into the
(optional) cable ext. connector. Pin [5-6] and [9-10] are shorted (default) to enable
the back panel audio function.
CN25 (CBOX™ 2 DigiDoc System Display Connector):
CBOX™ 2 features CHAINTECH's exclusive DigiDoc, the most advance system
diagnostic monitoring display.
-
80-PORT diagnostic display during POST at system boot up!
-
CPU temperature monitoring, your system stays cool always!
-
DigiDoc is the doctor for your system!
Please refer to Appendix Digidoc 80-Port POST Error Code List for the detail.
Chapter 2
25
Chapter 2
IR 1 (IR Connector):
Select a UART Mode in BIOS's Integrated Peripherals menu the UART port to
support IR function. (See section 3.4 Super I/O Device of Integrated Peripherals)
PT 6 / 7 / 8 (IEEE1394 Connector)
These connectors are for the bundled IEEE 1394 serial connector cables that connect
to the IEEE 1394 bracket. Attach the cable to these connectors, and the CBOX™2
Front panel's IEEE 1394.
26
Advertisement
Table of Contents
