How To Install - CHAINTECH 9EJS1 User Manual

6-2 HOW TO INSTALL

To start installations set up your CD-ROM device. Then insert the Thiz Linux 6.0
CD-ROM into the CD-ROM driver and switch on the computer. After turning on the
computer, select the required installation mode from the screen as shown below:
1. Graphical Mode
To select the [Graphical Mode] installation, please type [linux] and press [Enter],
or press [Enter] directly. The manual installation mode requires more user
configuration. Users can type [linux] and press [Enter] on the Boot-up Screen to
enter the [Graphical Mode] installation as shown below:
On the left hand side of the screen, you will find the [Online Help] frame for
various steps during installation. If you want to hide it to free more space in the
main frame, you can click on the [Hide Help] button at the bottom left hand corner.
You can call back the [Online Help] frame by clicking on the '' Show Help '' button.
Chapter 6
69
Chapter 6
Step 1. Language Selection (for installation program)
The first step of installation is to select the language for the installation program.
Options include the following:
- Brazilian _Portuguese
- English
- French
- German
- Italian
- Portuguese
- Russian
- Spanish
To select the language, click the language required to highlight it, then press the
[Next] button.
Step 2. Keyboard Configuration
The next step is to configure the keyboard. Users can use the default value under
normal situation.
70