Safety; Safety Notations; Chemical Safety; High Pressure Safety - TSI Instruments MSP TURBO 2950 User Manual

1 S
AFETY
1.1 S
AFETY
The following safety notations that are used throughout the Liquid Flow Controller user
documentation:
WARNING
CAUTION
NOTE or TIP
1.2 C
HEMICAL
Always follow the spill handling procedures indicated in the SDS of the chemicals when leakage or
spill occurs. Check the compatibility of the chemicals with the wetted materials of the Model 2950
Liquid Flow Controller.
The Model 2950 is capable of handling a variety of chemicals. The user is responsible for
verifying that the wetted materials of the controller are compatible with the chemicals being sensed.
These chemicals must also be checked for flammability and the potential of being toxic if inhaled and
the appropriate precautions must be taken. They may also be an irritant to the eyes and skin. Refer
to the Safety Data Sheet provided by your chemical supplier and take the following precautions for
safe and proper use:
Shipment and Dropage Have the Potential to cause damage and leaks
• Always read the Safety Data Sheet
• Avoid contacting chemicals with eyes, skin, and clothing.
• Wear all necessary protective clothing
• Keep chemical containers tightly closed and away from heat and open flame.
• Use chemicals only in a well-ventilated area.
• If you smell chemicals and develop a headache, or feel faint or nauseous, leave the area
immediately. Ventilate the area adequately before returning.
When connecting the controller, follow the guidelines in section 3.2 to avoid leaks.
1.3 H P
IGH RESSURE
The pressure rating of the Model 2950 depends upon the version of the controller being used. If the
pressure rating is exceeded, the controller may rupture and release the chemical flowing through it.
WARNING: Do not exceed the pressure rating of the controller (see section 5.1)
Model 2950 Liquid Flow Controller
N
OTATIONS
Significant potential for serious personal injury may exist if instructions are
not followed correctly. Text appears in Red.
Potential damage to the equipment may occur if instructions are not
followed correctly, but does not present significant potential for serious
personal injury. Text appears in Blue.
Additional information to aid the operator in carrying out the instructions.
No equipment damage or personal injury is likely to occur if the instruction
is not followed. Text appears in Black.
S
AFETY
Leakage Test is a Requirement Before Usage
S
AFETY
6015650 Rev 0
Page 5 of 55