TSI Instruments OmniTrak 7590 Quick Start Manual

Smart Station
Model 7590
Operation Instructions
1. Power On: On the
right side of the
Smart Station, hold
circle power button
down for 3 seconds.
2.  P owerOff: On the right side of the Smart Station, hold
circle power button down for 2 seconds. Two options
then pop-up on the screen to either Power Off or Restart.
3. Charging: Plug USB-C cable into bottom of device and
then into power source.
4. Connecting a Module: Power on module by holding
down the circle on the left for 1 second. A blue LED
light will start to blink indicating Bluetooth® is on.
- The module will appear in the list on the Smart Station.
If not, hit Refresh.
- Press desired module on screen to connect to
Smart Station. A green check mark indicates a
successful connection.
- Press Done
Now you're ready to take measurements.
The OmniTrak™ Smart Station can be used in conjunction
with any OmniTrak™ Module to provide immediate feedback
as to the conditions in the immediate area. Take measurements,
create reports, and analyze data provided to help improve
conditions. This instrument is a handheld device, not to be
worn on the body, or near an individual's head.
Dispose of battery in accordance with local rules
and regulations.
What's Included in the Box
▪ Device
▪ USB-C Cable