Supplier Declaration Of Conformity - Cisco 1000 Series Hardware Installation Manual

Supplier Declaration of Conformity

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against any harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction
manual, it may may cause harmful interference to radio communications.
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause an undesired
operation.
The operation of this equipment in a residential area is likely to cause harmful interference, in which case,
users are required to correct the interference at their own expense.
Radio Compliance
This system uses both licensed and licensed exempt radio frequencies. The radios are evaluated to the following
regulations:
The Wi-Fi Radio is evaluated to 47 Code of Federal Regulations Part 15.247 and Part 15.407.
Part 15 Radio Systems operating outdoors in the 5150-5250 MHz band must comply with the antenna
installation requirements as set forth in the FCC Part 15.407 rules.
The LTE radio is evaluated to 47 Code of Federal Regulation Part 24 and 27.
The LTE radio operates on licensed frequency bands and requires a radio license to operate. It must be operated
under the control of a Licensed Service Provider or Wireless Carrier.
Modifications by User or Installer
Modifying the equipment without Cisco's authorization may result in the equipment being no longer compliant
with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be
limited by FCC regulations, and you may be required to correct any interference to radio or television
communications at your own expense.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC RF Exposure Compliance
This product has been found to be compliant to the requirements set forth in CFR 47 Section 1.1307 addressing
RF Exposure from radio frequency devices, as defined in Evaluating Compliance with FCC Guidelines for
Human Exposure to Radio Frequency Electromagnetic Fields.
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
6
C H A P T E R
87