Table of Contents
Advertisement
5-2. Command Communication Protocol
The command communication protocol is the teli standard method (method in which parameters are set in
the registers in the camera).
In command send/receive operation, hexadecimal address and data are converted to ASCII data.
All ASCII alphabetic characters used are uppercase characters.
(1) Write to a register
To write data in a register, send a command, as follows. (Address' max-length is 3 bytes, and Data's
max-length is 8 bytes)
For example, to write data 0x38 to address 0x76, send a command, as follows:
The camera responds to the write command with No Error (ACK) or Error (NAK), as follows:
No Error (ACK):
Error (NAK):
( 9 / 24 )
D4148005A
Advertisement
Table of Contents
