Toshiba teli CleverDragon Series Specification page 11

5-3. Register Map
Read
Address
Write
0x00 Vendor Name
ASCII Format
| R.O.
0x0F
0x10 Model Name
ASCII Format
| R.O.
0x2F
0x30 Serial Number
ASCII Format
| R.O.
0x3F
0x40 Firmware Version
ASCII Format
| R.O.
0x47
0x48 FPGA Version
ASCII Format
| R.O.
0x4F
0x50 CPLD1 Version
ASCII Format
| R.O.
0x57
0x58 Reserved
N.A.
| | |
0x5F N.A. Reserved
0x60 Register Map Version
ASCII Format
| R.O.
0x67
0x68 Reserved
N.A.
0x69 Status
R.O.
0x6A Expanded Status
R.O.
0x6B N.A. Reserved
0x6C Memory Bank Confirmation
R.O.
0x6D Save to Memory
W.O.
0x6E Load from Memory
R.W.
0x6F Initialize Memory
W.O.
0x70 Setup (Offset) Level
R.W.
0x71 Reserved
N.A.
| | |
0x75 Reserved
N.A.
0x76 Gain
R.W.
0x77 Reserved
N.A.
| | |
0x7F Reserved
N.A.
R/W
Read/Write
R.O.
ReadOnly
W.O.
WriteOnly
N.A. Not Available
B&W Camera
CSCV90BC3
( 11 / 24 )
Vendor Name
TOSHIBA TELI
Model Name
CSCV90BC3
Serial Number
ex) 0000011
Firmware Version
01.01.01
FPGA Version
01.01.01
CPLD1 Version
01.01.01
Register Map Version
01.01
Status
Status information after Camera Controlling
Expanded Status
Detail information of the status
Memory Bank Confirmation
The number of memory banks the setting saved
0x01(Saved), 0x00(Not saved)
Save to Memory
Write 0x01 -> Save the current camera settings.
The camera uses saved settings after rebooting.
Load from Memory
Write 0x01 : Load saved settings
Write 0x00 : Load factory Settings
Initialize Memory
Write 0x01 : Set user settings as factory default.
Setup (Offset) Level
0-255
Default: 0
Gain
0(0dB) - 90(Approx. +12dB)
Default: 0(0dB)
D4148005A