Table of Contents
Advertisement
• Avoid intensive light
Do NOT expose the camera's image-pickup-plane to sunlight or other intense light directly. If the part of
CCD is exposed to spot-intensive light, you might get a picture problem like blooming and/or smear.
Under the comparison at the same video output level, the shorter the exposure time setting, the more smear
is generated.
• Occurrence of moiré
If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a
malfunction.
• Occurrence of noise on the screen
If an intense magnetic or electromagnetic field is generated near the camera or connection cable, noise may
be generated on the screen. If this occurs, move the camera or the cable.
• Handling of the protective cap
If the camera is not in use, attach the lens cap to the camera to protect the image pickup surface.
• If the equipment is not to be used for a long duration
Turn off power to the camera for safety.
• Maintenance
Turn off power to the equipment and wipe it with a dry cloth.
If it becomes severely contaminated, gently wipe the affected areas with a soft cloth dampened with diluted
neutral detergent. Never use alcohol, benzene, thinner, or other chemicals because such chemicals may
damage or discolor the paint and indications.
If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative.
Notes on using this product
( 5 / 24 )
D4148005A
Advertisement
Table of Contents
