Table of Contents
Advertisement
［ ［ ［ ［ Mechanical spec］ ］ ］ ］
(1) Lens mount
(2) Dimensions
(3) Mass
(4) Camera body grounding: insulation status
[Operating ambient conditions]
(1) Performance assurance
(2) Operation guaranteed
(3) Storage
conditions
(4) EMC
EMI (Electro-Magnetic Interference)
EN61000-6-4
EMS (Electro-Magnetic Susceptibility)
EN61000-6-2
(5) FCC
* About the conformity of EMC standard of this machine, it has guaranteed in the conditions
combined with our system condition. When used combined parts other than specification of our
company, I ask you to have final EMC conformity checked of a visitor with a machine and the
whole equipment.
(Electro-Magnetic Compatibility)
( 15 / 24 )
C-mount
*Depending on the lens you use, the performance of
the camera may not be brought out fully due to the
deterioration in resolution and brightness in the
peripheral area, occurrence of the ghost, aberration and
others. When you check the combination between the
lens and camera, be sure to use the lens you actually
use.
29mm(W) × 29mm(H) × 26.5mm(D)
* Not including protrusion
Approx. 45g
Conductive between circuit GND and camera body
Temperature: 0°C to +40°C
Humidity: 10% to 90% (no condensation)
Temperature: -5°C to +45°C
Humidity: 90% or less (no condensation)
Temperature: -20°C to +60°C
Humidity: 95% or less (no condensation)
FCC Part 15 Subpart B class A
D4148005A
Advertisement
Table of Contents
