Radius Server - D-Link DGS-3024 Manual

RADIUS Server

The RADIUS feature of the Switch allows you to facilitate centralized user administration as well as providing protection
against a sniffing, active hacker.
Click Port Access Entity > RADIUS Server to open the Authentic RADIUS Server Setting window shown below:
This window displays the following information:
Parameter Description
Succession <First>
RADIUS Server
<0.0.0.0>
Authentic Port
<1812>
Accounting Port
<1813>
Key
Confirm Key
Status
DGS-3024 Gigabit Ethernet Switch Manual
Figure 7- 60. Authentic RADIUS Server Setting window
Choose the desired RADIUS server to configure: First, Second or Third.
Set the RADIUS server IP.
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Set the RADIUS account server(s) UDP port. The default port is 1813.
Set the key the same as that of the RADIUS server.
Confirm the shared key is the same as that of the RADIUS server.
This allows you to set the RADIUS authentic server to Valid or Invalid.
84