Reauthenticate Port(S) - D-Link DGS-3024 Manual

Reauthenticate Port(s)

This window allows you to reauthenticate a port or group of ports by choosing a port or group of ports by using the pull
down menus From and To and clicking Apply. The Reauthenticate Port Table displays the current status of the
reauthenticated port(s) once you have clicked Apply.
Click Configuration > Port Access Entity > Reauthenticate Port(s) to open the Reauthenticate Port(s) window:
This window displays the following information:
Parameter Description
Port
MAC Address
Auth State
BackendState
OpenDir
PortStatus
DGS-3024 Gigabit Ethernet Switch Manual
Figure 7- 59. Reauthenticate Port window
The port number of the reauthenticated port.
Displays the physical address of the Switch where the port resides.
The Authenticator State will display one of the following: Initialize, Disconnected,
Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth, and
N/A.
The Backend State will display one of the following: Request, Response, Success, Fail,
Timeout, Idle, Initialize, and N/A.
Operational Controlled Directions are both and in.
The status of the controlled port can be Authorized, Unauthorized, or N/A.
83