Table of Contents
Advertisement
Display cover and antenna assembly
Replacement of the display cover and antenna assembly
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
wireless
card.
5. Remove the
display
assembly.
6. Remove the
display hinge
7. Remove the
display
bezel.
8. Remove the
display
hinges.
9. Remove the
display
panel.
10. Remove the eDP cable (plastic) or (aluminum), whichever applicable.
About this task
The following image indicates the location of the display cover and antenna assembly and provides a visual representation of the
removal procedure.
Figure 1. Display cover (plastic chassis)
NOTE:
The display cover and antenna assembly cannot be further disassembled. If the WLAN antennas are malfunctioning
and needs replacement, replace the entire display cover and antenna assembly.
74
Removing and installing components
Before working inside your
caps.
computer.
Advertisement
Table of Contents
