Table of Contents
Advertisement
Steps
1. Align and place the left hinge on the display assembly.
2. Install the three (M2.5x3.8) screws to secure the hinge to the display panel and back cover.
3. Align and place the right hinge on the display assembly.
4. Install the three (M2.5x3.8) screws to secure the hinge to the display panel and back cover.
Next steps
1. Install the
display
bezel.
2. Install the
hinge
caps.
3. Install the
display
assembly.
4. Install the
wireless
card.
5. Install the SSD.
6. Install the
base
cover.
7. Install the
SD
card.
8. Follow the procedure in
After working inside your
computer.
Removing and installing components
61
Advertisement
Table of Contents
