Table of Contents
Advertisement
Steps
1. Adhere the tape to securing the eDP cable to the display back cover.
2. Connect the eDP cable to the camera.
Next steps
1. Install the
display
panel.
2. Install the hinges.
3. Install the
display
bezel.
4. Install the
hinge
caps.
5. Install the
display
assembly.
6. Install the
wireless
card.
7. Install the SSD.
8. Install the
memory
modules.
9. Install the
base
cover.
10. Install the
SD
card.
11. Follow the procedure in
Removing the eDP cable (Aluminum)
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
67
Advertisement
Table of Contents
