Table of Contents
Advertisement
Quick Links
PRELIMINARY WARNINGS
The word WARNING preceded by the symbol
The word ATTENTION preceded by the symbol
instrument or the connected equipment. The warranty shall become null and void in the event of improper use or
tampering with the module or devices supplied by the manufacturer as necessary for its correct operation, and if
the instructions contained in this manual are not followed.
WARNING: The full content of this manual must be read before any operation. The module must only be used by
qualified electricians. Specific documentation is available via QR-CODE shown on page 1.
Electrical and electronic waste disposal (applicable in the European Union and other countries with recycling).
The symbol on the product or its packaging shows the product must be surrendered to a collection centre
authorized to recycle electrical and electronic waste.
SENECA s.r.l.; Via Austria, 26 – 35127 – PADOVA – ITALY; Tel. +39.049.8705359 - Fax +39.049.8706287
CONTACT INFORMATION
Technical support
This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.
The content of this document corresponds to the described products and technologies.
Stated data may be modified or supplemented for technical and/or sales purposes.
MI00575-0-EN
INSTALLATION MANUAL
R-32DIDO
R-32DIDO-P
The module must be repaired and damaged parts replaced by the Manufacturer. The product is sensitive to
electrostatic discharges. Take appropriate measures during any operation.
DOKUMENTATION
R-32DIDO
support@seneca.it
INSTALLATION MANUAL
indicates conditions or actions that put the user's safety at risk.
indicates conditions or actions that might damage the
DOKUMENTATION
R-32DIDO-P
Product information
sales@seneca.it
1/4
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Seneca R-32DIDO
Summary of Contents for Seneca R-32DIDO
- Page 1 The symbol on the product or its packaging shows the product must be surrendered to a collection centre authorized to recycle electrical and electronic waste. DOKUMENTATION DOKUMENTATION R-32DIDO R-32DIDO-P SENECA s.r.l.; Via Austria, 26 – 35127 – PADOVA – ITALY; Tel. +39.049.8705359 - Fax +39.049.8706287 CONTACT INFORMATION Technical support support@seneca.it Product information sales@seneca.it This document is the property of SENECA srl.
- Page 2 Digital inputs/outputs powered Digital inputs/outputs not powered IP address set (Status) Flashing Waiting for the IP address from the DHCP No Profinet communication (R-32DIDO-P version only) Flashing Profinet communication present Digital output in FAIL FAIL Digital output OK RS485 port wiring error...
- Page 3 Humidity: 10% ÷ 90% non condensing. ENVIRONMENTAL Storage temperature: from -30°C to +85 °C CONDITIONS Protection rating: IP20 With integrated WEB server (only R-32DIDO) / Easy Setup 2 CONFIGURATION 3.5 mm pitch terminal block, 1.5 mm max cable section CONNECTIONS /...
- Page 4 DAISY-CHAIN ETHERNET CONNECTION CAUTION IT IS NOT ALLOWED TO CREATE LOOPS WITH ETHERNET CABLES Using the daisy-chain connection it is not necessary to use switches to connect the devices. The following examples show the correct connections. MODULE 1 MODULE 2 MODULE 3 MODULE 1 MODULE 2...
Need help?
Do you have a question about the R-32DIDO and is the answer not in the manual?
Questions and answers