Setting The "Printing Preferences - MIMAKI APC-130 Operation Manual

Setting the "Printing Preferences"

This chapter explains about Printing Preferences when using APC-130.
 Form setting
1
Referring to P.8, display the "General" tab and click
• Display the "Form setting" tab of Printing Preferences.
• Depending on your usage, perform each setting.
(1) Orientation
Set whether to cutting the image vertically (Portrait) or horizontally (Landscape) in the paper.
(2) Rotate
Set whether to use the form vertically or horizontally.
Setting value.........0,90,180,270 (degree)
(3) Mirror
Flips horizontally and cuts.
(4) Paper size
Select the paper size attached to the APC-130 or the paper size to be recognized by the application
from the list box.
(5) Custom page
Enables to set up to 4 kinds of user size form.
Length ....... 50 to 15000mm
Width ......... 50 to 1300mm
When you click
returns to the defaul.
(6) Fit to page
Cuts the image scaled to the paper size.
(7) Output paper
Selection of the paper size is activated when "Fit to page" is checked.
, the custom page you set
Settings of the Printer Driver
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
.
9