Table of Contents
Advertisement
Etc
1
Referring to P.8, display the "General" tab and click
2
Click "Etc" tab.
• Depending on your usage, perform each setting.
(1) Output spool
When the processing by the driver is slow, you may output at a high speed after spooling the output
command on the hard disk.
• The spool folder is set using the following procedure.
(2) Show status dialog
Displays the progress of the driver output process.
(3) Command
Make the setting same as "Command changeover" of plotter.
(4) Driver DPI
Sets the resolution of the driver.
• When the cut quality is coarse or when small letters are cut, select 720 x 720 dpi.
(5) mm/inch
Changes the unit of the length (mm/inch).
(6) Configuration parameter
Output........ Saves the specified setting values of the driver.
Input .......... Reads the setting file saved and changes the driver setting values.
(7) Version
Displays version information of the printer driver.
(8) Help
Displays Help.
(9) Initialize all
Initializes all the setting values.
Windows XP: [Printers and Faxes] - [File] - [Server Properties] - [Advanced]
Windows 7/8: [Select either printer icon in Device and Printers] - Click [Print server
properties] - [Print Server Properties] dialog box - [Advanced] tab
Settings of the Printer Driver
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
.
13
Advertisement
Table of Contents
