Output setting
1
Referring to P.8, display the "General" tab and click
2
Click "Output setting" tab.
• Depending on your usage, perform each setting.
(1) Head withdrawal position
When this is checked, the head is withdrawn to the designated position when cutting is completed.
(2) Detail
button is activated when "Head withdrawal position" is checked.
When you click, the head withdrawal position setting is
displayed.
Width ......... Head withdraw position against the moving
direction of the head can be set. Set it in
the range of ("Current origin" or "Max. cut-
ting data") + (0 to 100mm).
Feed .......... Head withdraw position against the feeding
direction can be set. Set it in the range of
("Current origin" or "Max. cutting data") + (0
to 100mm).
• You can set the head withdrawal position of feeding direction set here as the origin.
Check "Sheet feed origin renewal", and then click
Settings of the Printer Driver
(1)
(2)
(3)
.
.
11