Table of Contents
Advertisement
Symbols
Notes and useful information are described with the mark below.
Symbols
Important notes in use of printer driver are given with this symbol. Understand the
notes thoroughly to operate the machine properly.
Useful information is given with this symbol. Refer to the information to operate the
machine properly.
Supported Plotter
This printer driver supports the plotter below manufactured by Mimaki Engineering Co., Ltd.
APC-130
System and Software
The following conditions are required to use Printer Driver.
This document explains the installation/set-up procedure using Windows 8 as an example.
Microsoft Windows XPSP3 (32bit only), Windows 7 (32bit/64bit),
OS
Windows 8(32bit/64bit), Windows 8.1(32bit/64bit)
CPU
IBM PC or compatible mounting Pentium processor or compatible CPU.
Check the setting on the plotter side
First, check the setting of the plotter.
• If each setting value of the plotter is different from the one in the table below, you cannot output
drawing normally.
Function
Connecting conditions of RS-232C
Origin
Setting of Pen No. assign
*1. When you changed the setting, perform "Initializing the Settings" in the Chapter 3 of the user's manual
to initialize the setting contents to the default. (However, all setting contents will be initialized to the de-
fault.)
Meaning
Setting Value
Data Length : 8bits
Lower left
Do not change it from the default.
Foreword
*1
5
Advertisement
Table of Contents
