Saxby Lighting Severus CCT Instruction Manual

Wiring

Having correctly identified the wiring from your light fitting, connect to the approved outdoor rated external terminal block in
the following way:
SUPPLY
NEUTRAL
SWITCHED LIVE
Check that...
• You have correctly identified the wires.
• The connections are tight.
• No loose strands have been left out of the connection block.
• Reseal the approved outdoor rated external terminal block.

Technical data

Supply
220-240 V~, 50 Hz
Voltage:
Bulb
2.8W LED module (SMD) CCT, 3000/4000/6500K
Type:
This product contains a light source of energy efficiency class E.
Non-replaceable light source
Conformity with all relevant UKCA Directive requirements.
Conformity with all relevant EC Directive requirements.
The power supply is Double Insulated and does not require connection to an Earth circuit.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is not suitable for dimming.
This product is rated at IP65.
65
IP

Care and Safety

We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before cleaning.
This light source is protected by a shade. This part must be replaced immediately should the shade
become cracked or damaged. This fitting must not be used without the shade in place.
Replace Cracked Shade
For further information, please visit https://www.lighting-info.co.uk/95285
V3 20/10/2021
UK Manufacturer: BH17 7BY
EU Manufacturer: Brilliant AG,
Brilliantstrasse 1, D-27442 Gnarrenburg
LIGHT FITTING
BLUE (N)
BROWN (L)
Non-replaceable control gear
Instruction manual
Severus CCT
95285, 99545
www.saxbylighting.com